IT Network Support (Dispatch) Joubertina

Hands & Feet (H&F) Support
• Physical onsite assistance to enable remote troubleshooting and remediation.
• Console connectivity to network devices (switch/router/firewall) as instructed by the Remote
Support Team.
• Providing physical access support to the Remote Support Team (e.g., opening racks, locating
devices/ports, power cycling per instruction).
• Visual verification and reporting (LED status, link status, alarms, fan/power status, cabling
condition).
Network Hands & Feet
Engineer must have basic understanding of network devices sufficient to:
• Identify network equipment types, ports, power supplies, uplinks, and patch panel layouts.
• Follow remote instructions accurately (step-by-step) without deviating from approved
runbooks.
• Perform basic checks: link lights, port mapping verification, cable reseat, label verification.
Network Device Rack & Stack
• Rack mounting/unmounting of network devices per site rules and safety practices.
• Patch and dress cables to basic professional standard (as instructed).
• Coordinate with Remote Support Team for post-install verification.
Basic Configuration
• Perform basic level initial actions (only as instructed by the Remote Support Team), such
as:
o Connecting console and granting remote access session (screen share/terminal access
where applicable).
o Executing clearly provided command steps (copy/paste) when approved.
o Applying basic baseline actions (e.g., set management IP/VLAN) only when explicitly
instructed and approved

 Requirements:

Working at Heights Training Certificate

Medical Fitness Certificate

Requirements

Required Tools 
Laptop (Windows/macOS) with terminal tools (e.g., PuTTY/teams/Anydesk) and with full administrator right. 
Console cable (e.g., RJ45-to-USB/Serial as applicable) and required adapters 
Spare Patch Cord/Cable (5m) x 2  
Basic screwdriver kit (Phillips/flathead/torx as applicable) 
Basic cable testing tools for damage identification (e.g., cable tester; other basic testers) 
Crimping tool and cutter 
RJ45 terminator (surplus) 
Labelling Machine